Kaiweets
KAIWEETS HT100 Stylo testeur de tension sans contact AC
Sans contact : avec sonde inductive NCV pour tension alternative ; Placez simplement la pointe près d'un bornier, d'une prise ou d'un cordon d'alimentation. Lorsque la pointe s'allume en rouge et que le stylet émet un bip, vous savez qu'il y a une tension présente.
Double gamme : Détecte les tensions standard et basse (12-1000V AC / 48-1000V AC). Le capteur NCV reconnaît automatiquement la tension et l'affiche sur le graphique à barres.
Niveau de sécurité : IEC classé CAT III 1000 V CAT IV 600 V, répond aux exigences CE ; Le testeur électrique est en toute sécurité à double isolation. Alerte haute tension pour vous avertir d'une tension supérieure à 90 V, l'écran devient rouge et le symbole de sécurité sur l'écran brille.
Design compact : lampe de poche LED lumineuse pour travailler dans des zones sombres ; Indicateur de faible puissance lorsque la tension de la batterie est inférieure à 2,5 V ; Mise hors tension automatique après 3 minutes sans opération ni détection de signal ; Le crochet pour stylo de poche vous permet de le transporter dans la poche de votre chemise.
Blog connexe : Comment utiliser le stylo testeur de tension
- USER MANUAL
- Download
- SPECIFICATION
- Wattage
- 0.45 watts
- Display Type
- LCD
- External Testing Certification
- CE, IEC CAT.III 1000V CAT.IV 600V
- Item Weight
- 0.06 KG
- Material
- ABS
- Batteries
- 2 AAA batteries required (included)
- Package Dimensions
- 6.57 x 1.38 x 1.06 inches
- Specific Uses For Product
- ▲Live/Null Wire Testing
▲Non-Contact Voltage Detection
▲Breakpoint Testing
Kaiweets
Adjustable Sensitivity with Dual Range
Low Sensitivity Mode: 12V TO 48V AC: No Beep, Green Screen.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
High Sensitivity Mode: 12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
Kaiweets
Null Wire & Live Wire Testing
Null Wire Testing
The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. Indicates that the tested line is a Null Wire
Live Wire Testing
The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly and the LCD shows red. This indicates that the line being tested is a live line.
Kaiweets
Breaking Point Test
Move the NCV tip of the tester along the wire, if the voltage alert signs disappear, that is most probably the breakpoint.
kaiweets
LED Flashlight
You can press and hold the “S” button for more than 2 seconds to turn the LED flashlight on/off, and then quickly use it to find problems in the circuit. The LED flashlight provides convenience in a dark environment.
kaiweets
Saving Power
Saving Power
Automatic Power Off after 3 minutes without operation or signal detection.
Battery replacement
Rotate the battery cover, remove the battery, and insert the positive terminal of the new battery toward the tip of the tester.
kaiweets
Easy to carry
A pocket-sized pen with a hook allows you to carry it in your pocket.