KAIWEETS KOM800PRO 3-in-1 Oscilloscope Multimeter
Livraison en 15 à 30 jours ouvrables.
Retours sans tracas sous 30 jours & Garantie de 3 ans
Conditions d'utilisation:
1. Ce produit (KAIWEETS Care) est un service spécial et ne peut être retourné.
2. Valable pendant trois ans à compter de la date d'achat.
3. Si le produit ou ses accessoires sont endommagés par des facteurs non humains, nous remplacerons les accessoires ou le produit gratuitement (livraison et remplacement gratuits).
4. Pour les commandes passées sur kaiweets.com uniquement.
5. KAIWEETS Tools se réserve le droit d'interpréter les présentes conditions.
WHY CHOOSE KOM800PRO: MAJOR UPGRADES. 3.2" Large IPS Display (vs 2.8" LCD) for clear outdoor viewing; 25,000 True Counts DMM (vs 19,999) for pro-grade accuracy; 4,000mAh All-Day Battery (vs 3,000mAh) for extended job site use; Double-Shot Molded Shell (vs Standard ABS) for drop protection; 5MHz Sine Wave Gen (vs 50kHz) for advanced automotive and electronics repair troubleshooting.
SEE THE SIGNAL, NOT GUESSWORK: 50MHz bandwidth with 100MSa/s real-time sampling captures fast edges and glitches. CH1/CH2 dual channels let you compare input vs. output side-by-side; auto-setup, rising/falling trigger, and waveform math (add/subtract) come standard. Built for switch-mode power supplies, motor drives, and I²C/SPI bus debugging.
LAB-GRADE ACCURACY IN YOUR PALM: 25,000-count True RMS DMM measures AC/DC voltage to 750V/1000V, current to 10A, resistance, capacitance, frequency, continuity and diode. Auto-ranging with manual override. The 3.2" IPS display stays readable in dim engine bays — check a battery, test a fuse, or trace a wiring fault with confidence.
INJECT, SIMULATE, CALIBRATE: Built-in DDS generator outputs sine, square, triangle, sawtooth and more from 1Hz to 5MHz, with adjustable amplitude and duty cycle. Simulate a crank sensor for ECU diagnostics, feed a clean signal into an audio amp — no separate function generator required.
RUGGED IN THE FIELD. RELIABLE IN THE LAB: 4000mAh Li-ion battery sustains long diagnostics on the job site or at your workbench; USB Type-C 5V/2A tops up from any laptop, power bank, or wall adapter. Double-shot molded housing — soft TPE over rigid PC/ABS — absorbs drops from the ladder or the lab table alike.
IMPORTANT SAFETY NOTE: The two oscilloscope channels share a common ground. The probe ground clips are electrically connected inside the unit. Never connect them to two different voltage potentials (e.g., hot + neutral, or separate DC rails) — this will cause a short circuit and may damage the device and the circuit under test.
EVERYTHING YOU NEED, RIGHT OUT OF THE BOX: 1× KOM800PRO Host, 1× Carrying Case, 1× Oscilloscope Probe, 1× BNC-to-Alligator Test Lead, 1× Test Leads (Red/Black), 1× Type-C Charging Cable, 1× User Manual. If anything comes up, just reach out to our team — we're always happy to help you get the most out of your meter.
Description
WHY CHOOSE KOM800PRO: MAJOR UPGRADES. 3.2" Large IPS Display (vs 2.8" LCD) for clear outdoor viewing; 25,000 True Counts DMM (vs 19,999) for pro-grade accuracy; 4,000mAh All-Day Battery (vs 3,000mAh) for extended job site use; Double-Shot Molded Shell (vs Standard ABS) for drop protection; 5MHz Sine Wave Gen (vs 50kHz) for advanced automotive and electronics repair troubleshooting.
SEE THE SIGNAL, NOT GUESSWORK: 50MHz bandwidth with 100MSa/s real-time sampling captures fast edges and glitches. CH1/CH2 dual channels let you compare input vs. output side-by-side; auto-setup, rising/falling trigger, and waveform math (add/subtract) come standard. Built for switch-mode power supplies, motor drives, and I²C/SPI bus debugging.
LAB-GRADE ACCURACY IN YOUR PALM: 25,000-count True RMS DMM measures AC/DC voltage to 750V/1000V, current to 10A, resistance, capacitance, frequency, continuity and diode. Auto-ranging with manual override. The 3.2" IPS display stays readable in dim engine bays — check a battery, test a fuse, or trace a wiring fault with confidence.
INJECT, SIMULATE, CALIBRATE: Built-in DDS generator outputs sine, square, triangle, sawtooth and more from 1Hz to 5MHz, with adjustable amplitude and duty cycle. Simulate a crank sensor for ECU diagnostics, feed a clean signal into an audio amp — no separate function generator required.
RUGGED IN THE FIELD. RELIABLE IN THE LAB: 4000mAh Li-ion battery sustains long diagnostics on the job site or at your workbench; USB Type-C 5V/2A tops up from any laptop, power bank, or wall adapter. Double-shot molded housing — soft TPE over rigid PC/ABS — absorbs drops from the ladder or the lab table alike.
IMPORTANT SAFETY NOTE: The two oscilloscope channels share a common ground. The probe ground clips are electrically connected inside the unit. Never connect them to two different voltage potentials (e.g., hot + neutral, or separate DC rails) — this will cause a short circuit and may damage the device and the circuit under test.
EVERYTHING YOU NEED, RIGHT OUT OF THE BOX: 1× KOM800PRO Host, 1× Carrying Case, 1× Oscilloscope Probe, 1× BNC-to-Alligator Test Lead, 1× Test Leads (Red/Black), 1× Type-C Charging Cable, 1× User Manual. If anything comes up, just reach out to our team — we're always happy to help you get the most out of your meter.
|
|---|