Kaiweets
KAIWEETS HT100 berührungsloser Spannungsprüferstift AC
Berührungslos: Mit NCV-Induktionssonde für Wechselspannung; Platzieren Sie die Spitze einfach in der Nähe einer Klemmenleiste, einer Steckdose oder eines Netzkabels. Wenn die Spitze rot leuchtet und der Stift piept, wissen Sie, dass Spannung anliegt.
Dual Range: Erkennt Standard- und Niederspannung (12–1000 V AC/48–1000 V AC). Der NCV-Sensor erkennt die Spannung automatisch und zeigt sie im Balkendiagramm an.
Sicherheitsstufe: IEC-zertifiziert, CAT III 1000 V, CAT IV 600 V, erfüllt CE-Anforderungen; Der Elektrotester ist sicher doppelt isoliert. Hochspannungsalarm, um Sie bei Spannungen über 90 V zu warnen, der Bildschirm wird rot und das Sicherheitssymbol auf dem Bildschirm leuchtet.
Kompaktes Design: Helle LED-Taschenlampe für Arbeiten in dunklen Bereichen; Low-Power-Anzeige, wenn die Batteriespannung unter 2,5 V liegt; Automatische Abschaltung nach 3 Minuten ohne Bedienung oder Signalerkennung; Der Stifthaken im Taschenformat ermöglicht es Ihnen, ihn in Ihrer Hemdtasche zu tragen.
- USER MANUAL
- Download
- SPECIFICATION
- Wattage
- 0.45 watts
- Display Type
- LCD
- External Testing Certification
- CE, IEC CAT.III 1000V CAT.IV 600V
- Item Weight
- 0.06 KG
- Material
- ABS
- Batteries
- 2 AAA batteries required (included)
- Package Dimensions
- 6.57 x 1.38 x 1.06 inches
- Specific Uses For Product
- ▲Live/Null Wire Testing
▲Non-Contact Voltage Detection
▲Breakpoint Testing
Kaiweets
Adjustable Sensitivity with Dual Range
Low Sensitivity Mode: 12V TO 48V AC: No Beep, Green Screen.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
High Sensitivity Mode: 12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
Kaiweets
Null Wire & Live Wire Testing
Null Wire Testing
The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. Indicates that the tested line is a Null Wire
Live Wire Testing
The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly and the LCD shows red. This indicates that the line being tested is a live line.
Kaiweets
Breaking Point Test
Move the NCV tip of the tester along the wire, if the voltage alert signs disappear, that is most probably the breakpoint.
kaiweets
LED Flashlight
You can press and hold the “S” button for more than 2 seconds to turn the LED flashlight on/off, and then quickly use it to find problems in the circuit. The LED flashlight provides convenience in a dark environment.
kaiweets
Saving Power
Saving Power
Automatic Power Off after 3 minutes without operation or signal detection.
Battery replacement
Rotate the battery cover, remove the battery, and insert the positive terminal of the new battery toward the tip of the tester.
kaiweets
Easy to carry
A pocket-sized pen with a hook allows you to carry it in your pocket.