Non-Contact Voltage Tester: The NCV sensor automatically recognizes the voltage. You just place the NCV inductive probe near the cables, cords, or outlet. Triple Volt Alert upon voltage detection: the NCV sensor changes to red and the buzzer sounds, the LCD screen display up to 8 bar graphs. In addition, the screen will light up red or green to distinguish between live/ neutral wire.
Adjustable Sensitivity with Dual Range: This voltage tester pen detects 12-1000V AC and 48-1000V AC. Press the “S” button to adjust sensitivity and adapt the low range for doorbells, thermostats, irrigation wiring, etc.
GFCI Function: This Electric tester tests GFCI devices by simulating ground fault conditions, It tests standard outlets (multiple outlets in the kitchen or bath, and outdoor receptacles require GFCI protection). Be careful using this function on normal receptacles. It may cause a house wiring trip.
KAIWEETS Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring conditions in an outlet based on LED light results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.
The NCV sensor automatically recognizes the voltage. You just place the NCV inductive probe near the cables, cords, or outlet. Triple Volt Alert upon voltage detection: the NCV sensor changes to red and the buzzer sounds, the LCD screen display up to 8 bar graphs. In addition, the screen will light up red or green to distinguish between live/ neutral wire.
This Receptacle tester detects the most common wiring faults in standard and GFCI electrical outlets, which is also with the standard 3-Wire and GFCI protected 220 Volt AC Outlets. Capable of detecting the open wiring fault with open ground, open hot, open neutral, reverse polarity, and hot/neutral reversed wires.
Null Wire Testing
The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. This indicates that the tested line is a Null Wire
Live Wire Testing
The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly, and the LCD shows red. This indicates that the line being tested is a live line.
This Electric tester tests GFCI devices by simulating ground fault conditions, which works on GFI outlets and confirms the operation of the ground fault protective device. It tests standard outlets that are wired in parallel to GFCI outlets (multiple outlets in kitchen or bath, and outdoor receptacles require GFCI protection)
Low Sensitivity Mode: 12V TO 48V AC: No Beep, Green Screen.
48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
High Sensitivity Mode: 12V TO 48V AC: Low-frequency beep, the red tip illuminates continuously.
48V TO 1000 V AC: High-frequency beep, The red tip illuminates continuously, red screen.
Designed tough to withstand job site drops and rough conditions.
1 x KAIWEETS HT106B Electrical Outlet Tester
1 x KAIWEETS HT100 Contact Voltage Tester
2 x AAA Batteries (Assembly Required)
1 x HT106B User Manual
1 x HT100 User Manual
1 x Packing Box