HT113B Multifunction Multimeter: Multimeter HT113B with 4000 counts Auto-ranging for precise measurement. Measures AC/DC voltage up to 600V, AC/DC current up to 10A, and resistance up to 40MΩ. Can be used for continuity tests, diode tests, and battery tests. Includes 1.5V and 9V battery test modes to easily test a wide variety of batteries.
HT100 Non-Contact Voltage Tester: Detects standard and low voltage (12-1000V AC / 48-1000V AC). With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Tests. Handy circuit tester for electricians, and homeowners.
HT105B Outlet Tester: Detects the most common wiring problems in standard 110-125V AC outlets. Works on GFI outlets and confirms the operation of the ground fault protective device. It is easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse, Live/Ground Reverse, Open Live & Live Neutral Reverse. Quick and easy to read for ultimate efficiency.
What Do You Get: 1 x HT113B Multimeter; 1 x HT100 Non-Contact Voltage Tester Pen; 1 x HT105B Outlet Tester; ( 3 in 1 Electrical Testing Kit ).
- 0.45 watts
- Display Type
- External Testing Certification
- CE, IEC CAT.III 1000V CAT.IV 600V
- Item Weight
- 0.06 KG
- 2 AAA batteries required (included)
- Package Dimensions
- 6.57 x 1.38 x 1.06 inches
- Specific Uses For Product
- ▲Live/Null Wire Testing
▲Non-Contact Voltage Detection
4000 Counts True-RMS Meter
Accurate measurements, even on non-linear loads
Wide Range of Uses
Car repair, industrial circuit inspection, home circuit check, battery testing, and so forth.
Non-Contact Voltage Tester
The NCV sensor automatically recognizes the voltage. You just place the NCV inductive probe near the cables, cords, or outlet. Triple Volt Alert upon voltage detection: the NCV sensor changes to red and the buzzer sounds, the LCD screen display up to 8 bar graphs. In addition, the screen will light up red or green to distinguish between live/ neutral wire.
Null Wire & Live Wire Testing
Null Wire Testing
The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. This indicates that the tested line is a Null Wire
Live Wire Testing
The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly, and the LCD shows red. This indicates that the line being tested is a live line.
Press for GFCI Test
This Electric tester tests GFCI devices by simulating ground fault conditions, which works on GFI outlets and confirms the operation of the ground fault protective device. It tests standard outlets that are wired in parallel to GFCI outlets (multiple outlets in kitchen or bath, and outdoor receptacles require GFCI protection)
Durable & Portable
Designed tough to withstand job site drops and rough conditions.
What Do You Get?
1 x KAIWEETS HT113B Multimeter
1 x KAIWEETS HT105B Outlet Tester
1 x KAIWEETS HT100 Valtage Tester
2 x Test Leads
1 x K-Type Thermocouples
2 x AAA Battery ( Assembly Required)
1 x HT113B User Manual
1 x HT105B User Manual
1 x HT100 User Manual
1 x Packing Box